三年在线观看免费大全下载,亚洲欧美国产日产综合不卡,国产专业剧情av在线,人妻暴雨中被强制侵犯在线

Elasticity in elastic denim refers to the ability to recover the shape of denim when the external force causing the deformation of denim is removed. The stretching of denim can be divided into unidirectional stretching and biaxial stretching. Uniaxial tensile means that the specimen increases along the tensile direction, while the dimension perpendicular to the tensile direction decreases. Biaxial stretching is stretching in two vertical directions at the same time, or in one direction. In the direction perpendicular to the tension, the size of the specimen is forced to remain unchanged.

Like other textile materials, elastic denim deformation is composed of three parts, namely, rapid elastic deformation, slow elastic deformation and plastic deformation. Rapid elastic deformation is the part that occurs when the load is added and disappears immediately after the load is removed. Slow elastic deformation is the part that increases with time after the load is added, but decreases gradually after the load is removed and disappears after time. Plastic deformation is due to the irrecoverable deformation part in the fiber or yarn microstructure.

The influence of different weave structure, different knitting tension and different knitting needle specifications in elastic denim on the instantaneous elastic recovery and delayed elastic recovery of elastic fabric in the longitudinal and transverse directions.

Elastic denim is made by adding elastic fibers in the weft, warp or both directions, such as spandex covered yarn, PBT, T-400, etc. Make denim clothing not only fit, comfortable, but also move freely. The elastic elongation is generally 20% - 40%, and its size is closely related to the fabric structure. The smaller the warp and weft tightness of the fabric, the greater the elasticity. In the case of warp tension, the greater the tension of weft elastic yarn, the smaller the elasticity; The weft tightness reaches the degree, and even the elasticity will be lost.

Due to the problem of excessive weft shrinkage of the finished elastic denim fabric, which is generally more than 10%, some even more than 20%, the unstable fabric width brings great inconvenience to the clothing production. Therefore, 20% - 30% is generally used in product design. Keep the tension of elastic denim in the warp and weft directions, properly increase the tension during the preshrinking finishing, so that the fabric width has a large shrinkage, and thus obtain a lower residual shrinkage in the weft direction of the finished fabric. It is also possible to heat set the elastic denim fabric after pre-shrinking, so as to obtain a uniform cloth width and a stable and low weft shrinkage.

Article source: elastic denim manufacturer http://www.djpt8.cn